| Item | Content | Criterion |
| Application | Battery Type | LiFePO4 |
| Battery Cell | 4 | |
| Charge Parameters | Input charging voltage | 14.4V±0.15V |
| Input charging current | Max100A | |
| Discharge Parameters | Continuous discharge current | Max 100A |
| Item | Content | Criterion |
| Over charge protect | Over charge detection voltage(Cell) | 3.750V±0.050V |
| Protect delay time | 500ms—1500ms | |
| Over charge release voltage(Cell) | 3.500V±0.100V | |
| Over discharge protect | Over discharge detection voltage(Cell) | 2.200V±0.050V |
| Protect delay time | 500ms—1500ms | |
| Over discharge release voltage(Cell) | 2.700V±0.100V | |
| Over Current protect | 1st Level Overcurrent Discharge | 600A±80A |
| Protect delay time | 50ms—150ms | |
| 2st Level Overcurrent Discharge | 1200A±80A | |
| Protect delay time | 5ms—15ms | |
| Protect relieve condition | Cut load | |
| Overcurrent charge | 120A±20A | |
| Protect delay time | 500ms—1500ms | |
| Balanced | Balanced open voltage(Cell) | 3.50V±0.050V |
| Balanced release voltage(Cell) | 3.50V±0.050V | |
| Balanced current(Cell) | 55±10mA | |
| Short Protection | Protect current | MIN2400A |
| Detection delay time | 100-600us | |
| Recovery condition | Cut short circuit . Cut load | |
| Over temperature | Over charge temperature(Battery) | 65℃±4℃ |
| Over charge temperature releas(Battery) | 55℃±4℃ | |
| Item | Content | Criterion |
| Over temperature | Over discharge temperature(Battery) | 70℃±4℃ |
| Over discharge temperature releas(Battery) | 60℃±4℃ | |
| Under charge temperature(Battery) | -0℃±4℃ | |
| Under charge temperature releas(Battery) | 5℃±4℃ | |
| Under discharge temperature(Battery) | -20℃±4℃ | |
| Under discharge temperature releas(Battery) | -15℃±4℃ | |
| Over temperature(MOSFET) MOSFET | 100±4℃ | |
| Over temperature releas(MOSFET) MOSFET | 75±4℃ | |
| Detection delay time | 3-6S | |
Dimension(L*W*T) |
168*88*15mm | |
| NO | Items | condition | Remarks | |
1 |
Impedance | ≤10mΩ | B-到P-的阻值及B+到P+的阻值之和 | |
2 |
Current consumption | Operation mod | ≤200uA | 实际自耗电值是不断跳动的，应取平均值 |
